Looking for 352A mixer schematic

[tictac]

Just bought one of these and it's a bit beat, sure could use a schematic, anyone got one?

[d. gauss]

i just bought one too. any info at all on these would be appreciated. (i just want to use the preamps if possible)

[LICORNE]

If I remember the model number was 1607 in the 70's not 352A. So your model must be close to that number. IT's a professional Bodcast mixer.
Could be used for Radio Stations . Many consoles were built using 2 of these units for a max of 12 mics.

Unfortunalely I can't help you with the number you gave me.

..........................................

[Old Guy]

Convergence - 300 series stuff is older.

I'll ask around but info that old is scarce.

[Old Guy]

http://cgi.ebay.com/Altec-352A-Mixer...QQcmdZViewItem

[Old Guy]

This fellow says he has the schematic- he either trades to build his collection or charges something like $5. You may want to try him if no one here has it.

http://www3.telus.net/public/vintage1/tube.htm

[d. gauss]

yep that's just like the one i bought. (cept i don't have the VU meter option or the compressor)

i emailed the fellow you mentioned for the schematic. we'll see what happens. thanks.

right now the unit isn't working. i noticed that the power transistor/heat sink assembly connects to the board via a little plug. any of you electronics experts know if it is ok to run with the power transistors disconnected? curious to see if at least the preamp part works.